Accessories for Shelving
Hanging panels, safety accessories, identification accessories, etc. Find everything you need to make your storage as efficient as possible.
Vertical Security Bar
- Locks all drawers in a shelving unit with a key or padlock
- The key or safety hasp is located at the top of the bar to facilitate access
- Covers a bank of drawers from 18″H to 48″H
- Quick and easy hook-on assembly
- More than one bar on the same mounting bracket can be installed (for different users)
- Installs on the right-hand side
- The 36″H bar is compatible with the 34″H mounting bracket, and the 48″H bar is compatible with the 46″H mounting bracket
Security Panel
- Blocks access between two drawers with locks
- Usable space in the cabinet is reduced by 1″
- Installs between two drawers
- Divides the cabinet up for use by more than one user
Integrated Lock-In Mechanism
- Automatically activated when lifting the handle up
- The drawer or roll-out shelf can be opened with one hand only
- Closes with a simple push
- Stops drawer or roll-out shelf from opening on their own
- Easy to retrofit
Lockout Mechanism
- For both drawers and roll-out shelves
- Locks drawers and roll-out shelves in an open position
- Activated manually, only when required
- Compatible with all drawer accessories
- Plastic bins in the back row may make it more difficult to activate the mechanism
Drawer Lock
- Compatible with all drawer dimensions
- Does not reduce the drawer’s storage space
- Easy to retrofit
Screwdriver Holder
- Compatible with Rousseau utility panels.
- Keeps 6 to 12 screwdrivers close at hand.
- Compatible R2V vertical drawer utility panels
Pliers Holder
- Can be used to store up to 6 pliers.
- Compatible with Rousseau utility panels.
- Compatible R2V vertical drawer utility panels
Drill Holder
- Color : black
- Compatible with Rousseau utility panels
- Compatible R2V vertical drawer utility panels
Double Back Double Hooks
- Compatible with Rousseau utility panels.
- Compatible R2V vertical drawer utility panels.
- Color : black.
- Sold in packs of 10.
Single Loop Hooks
- Compatible with Rousseau utility panels
- Compatible R2V vertical drawer utility panels
- Color : black
- Sold in packs of 20
Can Support
- Very useful for storing products of all kinds, such as cans of different sizes.
- Hook-on installation.
- The side security notches ensure stability.
- Compatible with Rousseau utility panels
- Compatible with MultiTek cart utility panels
- Compatible R2V vertical drawer utility panels
Support For Plastic Bins
- Compatible with Rousseau utility panels
- Compatible with MultiTek cart utility panels (RV52 / RV53) 36 inches wide.
- Very useful for hanging plastic bins, making it easy to store small parts.
- Hook-on installation.
- The side security notches ensure stability.
- Ideal for plastic bins available on the market that are equipped with a hook-on edge.
- Compatible with RG20 plastic bins.
- Bins sold separately.
HEAVY-DUTY ROUND HOOK
- Tube measures 3/4″ in diameter.
- Allows accessories and tools to slide easily.
- Hook-on installation.
- The side security notches ensure stability.
- Capacity : 50 lb.
- Sold by the unit.
- Base of hook : 2″W (3 holes) x 5″H.
- • Compatible with Rousseau utility panels
Partial Divider
- Unique patented design for easy position changes
- Height: 51⁄2″
- Easy tool-free installation
Vinyl Rub-On Identification Decal
- Allows you to easily identify where tools are to be positioned on the utility panels
- The contrasting color provides fast retrieval and shows if tools are missing, and which ones.
- Efficient help for 5S management.
- Sold in rolls 2 feet wide and 8 feet long.
- For personalized configuration, contact us!
Tiltable Shelf For Utility Panel
- Slotted to receive SH52 dividers at every 2″ c/c.
- Includes 2 side supports that may be placed at right angles or at an angle of 15°.
- The shelf is reversible and its edge may serve as a back stop for plastic bins or binders.
- Capacity : 50 lb, evenly distributed load.
- Available in 3 widths: 13″ (14 holes), 15″ (16 holes) and 31″ (32 holes).
- Must be clipped onto a 36″ wide panel minimum.
- For personalized configuration, contact us!
- Compatible with Rousseau utility panels
Hook For Rail
- 50 lbs capacity per hook.
- Hooks pivot once installed on the SR62 rail.
- Can be put on and taken off even when the rail is in place on the adaptors.
Double Hanging Rail
- 300 lbs capacity per rail.
- Installs on Spider® post with hooks, no bolts.
- Includes security mechanism to keep from accidentally unhooking.
- Compatible with SR63-02 hooks (not included).
- For personalized configuration, contact us!
Single Divider
- Divides those parts that lean vertically against the back of the Mini-racking.
- Installs on medium-duty (SR21) or heavy-duty (SR22) beams
- Divider can be adjusted laterally (left to right) without tools.
- Compatible with 24″ deep units and deeper.
Leveling Glides Kit For Spider® Shelving
- Serves to adjust the height of the Spider® shelving unit 1 1/4″ to 2 1/8″ on uneven floor surfaces.
- Maximum capacity of 750 lbs / glide.
- Offered for 99″ high shelving and less.
- Compatible with SR posts and SR uprights only.
- Not compatible with RF32/RF36 drawers, RF41/RF45 roll-out shelves and the SH28 base.
- Sold in pairs.
Bumpers For Mobile Shelving And Mini-Racking
- Color : gray
- Installed on the 4 corners of the base to protect from impacts.
- Sold in kits of 4.
LED Light For Spider® Shelving
- Eliminates shaded areas between shelves.
- Installs under SH20 shelves.
- Casts brighter light than fluorescent tubes and is more energy efficient.
- Color temperature : 6000-7000 K (cool).
- Rigid aluminium housing.
- Equiped with a 10 foot long cord.
- Fits on 42″ or 48″ W shelves.
Flipper Door
- Full-width handle.
- Includes an L50 electronic lock.
- Installs between 2-SH20 shelves.
- SH52 dividers can be installed.
- For personalized configuration, contact us
Magnetic Label Holder
- Comes in 6″ lenghts and can be cut with scissors or a knife.
- Note : Paper strips are not included with label holder.
- For personalized configuration, contact us!
Spool Support, 1 or 2 Rails
- Optimizes storage of spools in shelving.
- 50 lb capacity per rail, 100 lb total per double rail.
- Rails with 3/4″ diameter, compatible with most spools.
- Design allows for pivoting of rail to facilitate changing spools.
- Combinations possible for different sized spools.
Clothes Hanging Rail
- 80 lb capacity per rail.
- Simple and fast installation.
- Installs by hooking to the shelving posts.
- Includes one bar with a 1″ diameter and 2 adaptors.
- Note: because of space required under the clothes rail, it is not recommended for use on multi-level shelving installations.
Full Height HD Utility Panel
- Full height HD utility panel for end of aisle unit.
- Holes at every 1″ c/c.
- Fast and easy hook-on assembly.
- Polished look.
- Compatible with our light duty hooks: WM9F, WM9G, WM9H, WM9J, WM9L and our heavy duty hooks: WM9A and WM9B.
- Also compatible with WM9C, WM9D, WM9M, WM9N supports and WM21 shelf.
- Capacity: 50 lb/square foot, maximum of 500 lb per panel, evenly distributed load.
Side Utility Panel
- The SH68 side utility panel installs on either the inside or the outside upright.
- Simple assembly, no tools required.
- Available in 4 widths: 12″ (8 holes), 15″ (12 holes), 18″ (14 holes), 24″ (20 holes).
- Compatible with our light duty hooks: WM9F, WM9G, WM9H, WM9J, WM9L and our heavy duty hooks: WM9A and WM9B.
- Compatible with WM9C, WM9D, WM9M and WM9N supports.
- Compatible with WM21 shelf.
- Capacity: 50 lb/square foot, maximum of 300 lb per panel, evenly distributed load.
Back Utility Panel
- The SH67 back utility panel installs on either the inside or the outside upright.
- Simple assembly, no tools required.
- Compatible with our light duty hooks: WM9F, WM9G, WM9H, WM9J, WM9L and our heavy duty hooks: WM9A and WM9B.
- Compatible with WM9C, WM9D, WM9M and WM9N supports.
- Compatible with WM21 shelf.
- Capacity: 50 lb/square foot, maximum of 300 lb per panel, evenly distributed load.
Side Panel for Plastic Bins
- Installs on either the inside or the outside of the upright.
- Simple assembly, no tools required.
- Used for hanging RG20 bins.
- Compatible with all brands of plastic bins offered on the market that are equipped with a hanging lip
Dividing Guide
- Compatible with SH20 and SH21 BOX shelves only.
- Held at the front and back of the shelf by a plastic end cap.
- Adjustable in 3″ increments center to center.
Shelf Divider
- Dividers are attached one into the other.
- 2 nylon clips provided with each divider.
- Nominal dimensions (c/c with shelves).
Polycarbonate Doors with Frame
- Patent pending.
- Includes an L3 key lock.
- The lock is positioned so it does not impede the hand.
- Hinges can be adjusted to move door horizontally and vertically.
- Door closes with a simple push.
- Door opens to the left or the right.
- Doors with polycarbonate panels ensure you can see contents.
- Excellent impact resistance.
- Doors open 180°, with recessed lock and handle.
- Simple and fast assembly.
- Frame spaced to allow for installation of Rousseau modular drawers
- Compatible with Rousseau Spider® Shelving only.
