Accessories for Cabinets

Accessories for your cabinets can make your job easier and save you time.  They can also provide security, organization and make your location look better.

Vertical Security Bar

  • Locks all drawers in a cabinet with a padlock on the right (A) or left (B)
  • Safety hasp is located at the top of the bar to facilitate access
  • Covers a bank of drawers from 20″H to 54″H
  • Allows full access to drawers even when installed against a wall
  • More than one bar on the same cabinet can be installed (for different users)

Security Panel

  • Blocks access between two drawers with locks
  • Usable space in the cabinet is reduced by 1″
  • Installs between two drawers
  • Divides the cabinet up for use by more than one user

Central Locking System

  • Locks all drawers and roll-out shelves in the cabinet at the same time
  • Drawer and roll-out shelf positions can be reconfigured
  • Easy to retrofit

Cabinet  Safety Hasp

  • Locks all drawers and roll-out shelves in the cabinet at the same time
  • Drawer and roll-out shelf positions can be reconfigured
  • An alternative to an RB10 Vertical Security Bar
  • Easy to retrofit

True One-Drawer-at-a-Time System

  • Prevents multiple drawers from opening at the same time, which ensures the cabinet’s stability and users’ safety
  • To retrofit this mechanism, order an RB15 and specify the number of drawers and roll-out shelves in the cabinet

Electronic Lock For Cabinet With Drawers

  • Electronically locks all drawers in the cabinet at the same time
  • No key required
  • Up to 20 different users can be programmed
  • 4- to 8-digit access codes
  • Simplifies access management to drawers
  • To order the complete mechanism with a cabinet with drawers, order an RB00-DDHHL50
  • To order as a replacement lock, order an HA62-L50

Electronic Lock For Doors

  • Electronically locks a cabinet door
  • key required
  • Up to 20 different users can be programmed
  • 4- to 8-digit access codes
  • Compatible with single, double and polycarbonate swing doors, with or without frame

Steel Top With Rubber Mat

  • 1/8″-thick non-slip neoprene surface
  • Includes edges on the sides and back
  • Height: 1″

Laminated Hardwood Top

  • Top for general industrial applications
  • Thickness: 13/4″
  • Made from varnished hardwood slats
  • Includes a 90° radius front edge for extra comfort
  • High impact resistance
  • Attractive appearance

Stainless Steel Top

  • 16ga stainless steel: RC35-WWDD
  • 12ga stainless steel: RC35-WWDD-12
  • Acts as a work surface and protects the cabinet from impacts
  • Particle board top with stainless steel cover (#4 brushed finish)
  • Excellent corrosion and chemical resistance
  • Top complies with CARB regulations on formaldehyde emissions
  • Includes welded corners for an attractive appearance
  • Thickness: 13⁄4″

Marine Edge Stainless Steel Top

  • Marine edge 16ga stainless steel: RC35-WWDD-16M
  • Marine edge 12ga stainless steel: RC35-WWDD-12M
  • Prevents small objects or liquids from falling or spilling from the work surface
  • Acts as a work surface and protects the cabinet from impacts
  • Particle board top with stainless steel cover (#4 brushed finish)
  • Excellent corrosion and chemical resistance
  • Top complies with CARB regulations on formaldehyde emissions
  • Includes welded corners for an attractive appearance
  • Thickness: 13⁄4″

Painted Steel Tops

  • Acts as a work surface and protects the cabinet from impacts
  • Particle board top with painted steel cover
  • Top complies with CARB regulations on formaldehyde emissions
  • Includes welded corners for an attractive appearance
  • Thickness: 13⁄4″

Sloped Top

  • The 30° sloped surface opens so documents and other items can be stored inside
  • Compatible with a 1⁄2″ dia. articulated lamp
  • Load capacity: 100lb. (evenly distributed)
  • For compatibility with doors with frame, choose a top 3″deeper than your cabinet, e.g., 27″D cabinet + door with 3″D frame = 30″D top
  • Standard lock included

Partial Divider

  • Unique patented design for easy position changes
  • Height: 51⁄2″
  • Easy tool-free installation

 

Back or Side Stop

  • Painted steel: WS18
  • Stainless steel: WS98
  • Can be installed on back or sides depending on top dimensions
  • Installs on WS14 and RC37 tops
  • Height: 5″
  • Clears top by approx. 31/4″

Stacking Cabinets

  • One shelf, adjustable in 1″ increments c/c
  • One bottom shelf
  • Standard lock included on each door
  • Heights available: 24″, 30″ and 34″
  • Includes hardware kit for stacking

 

 

Cover Panel for Computer Mount

  • Painted steel: RC68
  • Stainless steel: RC69
  • Can be combined with a power feed panel or a cover panel on the same workstation or cabin
  • Available with or without a back finishing panel

Power Feed Panel

  • Painted steel: RC64
  • Stainless steel: RC65
  • Includes a power bar with three 12A outlets for a 15A circuit
  • Three additional versions available: with a knockout for a pneumatic connection and a perforation (with a cover plate) for a telephone/Ethernet jack; or with two USB ports; or with knockout, perforation and two USB ports
  • Installs on RC35 and RC37 tops only

LCD Monitor Arm

  • Supports most LCD monitors on the market (max. 21″)
    • Includes one or two arms with two-section articulation
    • Complies with VESA 75 and 100 monitor mounting standards
    • The two-section articulating arm allows for increased adjustability
    • The screen can also be tilted for better ergonomics
    • One or two arms can be ordered

 

 

Laptop Arm

  • Holds a laptop computer, papers, binders or any other object
  • Tray’s usable area: 14″W × 12″D
  • Includes a two-section articulating arm and a tray
  • The two-section articulating arm allows for increased adjustability
  • The tray can also be tilted for better ergonomics

LCD Monitor, Keyboard & Mouse Mount

  • Holds a computer monitor, keyboard and mouse
  • Tray’s usable area: 23 5/8″W × 81/2″D
  • Includes an articulating arm and tray for a keyboard, and mount for a screen
  • Complies with VESA 75 and 100 monitor mounting standards
  • Supports most LCD monitors on the market (max. 21″)
  • The tray and screen can also be tilted for better ergonomics

Tablet Arm

  • Supports most tablets on the market
  • Includes a two-section articulating arm  and a tablet mount
  • The clamps and mount have a non-slip surface to keep the tablet stable
  • The two-section articulating arm allows for increased adjustability
  • The mount can also be tilted for better ergonomics
  • Compatible tablet sizes:
    ҃ Small: 75/8″W to 10″W
    ҃ Large: 97/8″W to 121/4″W

 

 

Side Utility Panel

  • 5S storage accessory
  • Maximizes the cabinet’s storage space
  • Installs on the sides of R cabinets
  • Quick and easy installation
  • Includes perforations spaced 1″ apart c/c for hanging a range of hooks
  • Load capacity: 50lb./sq. ft. 500lb. max. per panel
  • Compatible with WM9F, WM9G, WM9H, WM9J and WM9L light-duty hooks, and WM9A and WM9B heavy-duty hooks
    Compatible with WM9Q tool holders, WM9C bin rails, WM9D can holders,WM9M and WM9N hooks, WM9P spool and roll holders, and WM21 shelves
  •  Available in all standard R cabinet dimensions (depth, height)

Side Panel For Plastic Bins

  • 5S storage accessory
  • Maximizes the cabinet’s storage space
  • Installs on the sides of R cabinets
  • Quick and easy installation
  • Holds RG20 plastic bins
  • Compatible with all commercially available brands of plastic bins with a hanging lip
  • Available in all standard R cabinet dimensions (depth, height)

ESD Cabinet

  • Special paint dissipates electric charges (Black 090)
  • Includes a grounding cord with 1MΩ resistance and a socket for a grounding wrist strap

Grounding Wrist Strap

  • Made of stretch fabric
  • Includes a 6″ cord with 1MΩ resistance
  • Dissipates electric charges that can damage electronic components

Waste & Recycling Cabinet

  • Can be used as a standalone unit, as part of a cabinet configuration (e.g., counter cabinets) or integrated underneath a work surface
  • Used for sorting waste and items for recyclingIncludes one 26″H drawer with labeled drawer handle to facilitate sorting
  • Includes two 15 1/4″W × 11″D × 20″H containers: a black container for waste (RK09-02) and a blue container for recycling (RK09-01)
  • The drawer includes a divider which secures the containers and also allows items to be stored behind

Do you need accessories for your Cabinets ?